Rugged RFID Tag Ideal for On Metal Asset Tracking

Toronto, Canada – GAO RFID Inc. recommends its 433MHz rugged RFID asset tag (GAO124017) generally used for outdoor asset tagging applications. This active RFID tag is ideally suited for operating on metallic surface or plastics containing a high metal content.

GAO’s 433MHz active RFID rugged asset tag is encapsulated in a moulded plastic case in order to protect against adverse environmental conditions. The smart tag transmits Radio Frequency (RF) signals at pre-set time-intervals for the duration of its life. This RFID tag offers configurable settings including customer site code, tag ID, tag age, counter value, movement alarm and tamper alarm status. It offers a transmission range of 0 to 50m depending on antenna configuration. In addition, the tag can be configured to accommodate Wiegand interfacing.

About GAO RFID Inc.

GAO RFID Inc. is a leading provider of Radio Frequency Identification (RFID) hardware and solutions to end users worldwide. GAO RFID combines best of breed with low cost RFID readers, RFID tags and enabling-RFID software. GAO offers a wide variety of RFID readers, tags and antennas in all the RFID technologies, Low Frequency (LF), High Frequency (HF), Ultra High Frequency (UHF, Gen 2) as well as Active and Semi-Passive. GAO RFID’s products and services are easily customized for use in asset tracking, healthcare, supply chain & logistics, event management, access control, livestock tracking, inventory control & management, field service maintenance and document authentication.

GAO’s 433MHz active RFID rugged asset tag is encapsulated in a moulded plastic case in order to protect against adverse environmental conditions. The smart tag transmits Radio Frequency (RF) signals at pre-set time-intervals for the duration of its life. This RFID tag offers configurable settings including customer site code, tag ID, tag age, counter value, movement alarm and tamper alarm status. It offers a transmission range of 0 to 50m depending on antenna configuration. In addition, the tag can be configured to accommodate Wiegand interfacing.

Rfid Product China Manufacter:Daily Anounces Entry Into Worldwide Rfid Market

DAILY RFID( www.rfid-in-china.com ), a Chinese leading manufacter of RFID tags and rfid readers, announces its planned entry into worldwide passive radio frequency identification (RFID) Market.

  

DAILY RFID, with its own factory in China with an area of 5000 square meters, focuses on the development and research of RFID & EPC technology. We specialize in manufacturing RFID Tag, RFID Label, Smart Card and RFID Reader, as well as RFID development kit.

  

“Working with customers and business partners, we’ve learned that many are eager to deploy, research and develop RFID projects, with high accuracy, while keeping their investment low,” said David, DAILY technical manager. “And for ease of purchase of our RFID products, we are looking forward to finding our product agent in worldwide, to make the RFID Technology come out of China, to face the world.”

  

Through ease of use, wide-reaching functionality, DAILY is hoping to have a solution for serving the large variety of needs in the expanding RFID market.

  

Information about DAILY RFID tags, RFID readers, RFID labels and RFID kits can be found at http://www.rfid-in-china.com.

  

About DAILY RFID CO.,LIMITED

  

DAILY RFID CO.,LIMITED( www.rfid-in-china.com ), which belongs to PAN Group Co., ltd, is the leading company focusing on the research and development of EPC & RFID technology in China. We specialize in manufacturing RFID Tag, RFID Label, Smart Card and RFID Reader, as well as RFID development kit.

  

DAILY RFID has its own factory in China with an area of 5000 square meters with more than 150 workers. And we have obtained CE, FCC, ROHS, CS, GS, PSE, UL and ISO9001 Quality Management System Certification. We are commited to providing “Innovative Technology”, “Superior, Cost-efficient Product” and ” Professional, Efficient Customer Services”.

Smart RFIDs

Thank you for visiting and supporting Smart RFIDs. Most of us know about the barcode technology which has been tracking things for several decades. The problem with these is that they are meant only to be read, they are “dumb” in that they cannot communicate directly with external devices. Smart RFIDs (Radio frequency identification) are components of a system which involves the use of an smart tag applied to or incorporated into a product, animal, or person for the purpose of identification and also tracking – using radio waves. Some tags can be read from several meters away and beyond the line of sight of the reader.

Brief Interruption. Need a Vacation? Click here…

Most RFID tags contain at least two parts. One is an integrated circuit for storing and processing a radio signal, and the other is an antenna for receiving and transmitting the signal. There are generally three types of RFID tags: 1) active RFID tags, which contain a battery and can transmit signals autonomously 2) passive RFID tags, which have no battery and require an external source to provoke signal transmission, and 3) battery assisted passive (BAP) for a much greater read range. Today, Smart RFIDs are used mostly in inventory tracking and management.

An Active Beaconing Rfid Tag For Asset Locating And Tracking

 

Toronto, Canada introduces a new 2.4GHz active beaconing RFID tag This tag is especially useful in asset locating and tracking items in warehouse inventory management. Its use of active RFID makes the tag able to provide tracking with a long-reach of 30 meters (98 feet).
This innovative RFID Tag is also designed to be tamper proof and sounds an alarm if someone tries to dislodge it. With a smart tiny button on the bottom of the tag when a user applies the tag to the asset, the button is pushed in and the tag will transmit a “normal” signal. If the tag is peeled off, the button will pop up and the tag will send an “alarm” signal to indicate abnormal status. The tag’s built-in LED will flash, or ‘beacon’, once the tag receives a specific signal from a nearby RFID reader, allowing the user to locate the asset attached with the beaconing tag.
provides the following features:

Excellent for mount on-metal applications Reliable RF signal and communication over a long distance even in harsh environments Tamper-proof with alarm 2.45GHz microwave frequency 100-tag/s identification rate, 2,000 tag management in RF field Transmits ID every 2 seconds Reader communication is bi-directional, providing two commands: Addressing Command and Stop Addressing Command.

recommends its smart 433MHz active key fob RFID tag especially designed for applications where door or safe keys need to be tracked.

About GAO RFID Inc.

GAO RFID Inc. is a leading provider of Radio Frequency Identification (RFID) hardware and solutions to end users worldwide. GAO RFID combines best of breed with low cost RFID readers, RFID tags and enabling-RFID software. We have a wide variety of RFID readers, tags and antennas in all the RFID technologies, Low Frequency (LF), High Frequency (HF), Ultra High Frequency (UHF, Gen 2) as well as Active and Semi-Passive. GAO RFID’s products and services are easily customized for use in Asset Tracking, Health care, Supply Chain & Logistics, Event Management, Access Control, Livestock Tracking, Inventory Control & Management, Field Service, Maintenance and Document Authentication.

For any media queries:

Director of Marketing,
416-292-0038 ext 238

 

Toronto, Canada introduces a new 2.4GHz active beaconing RFID tag This tag is especially useful in asset locating and tracking items in warehouse inventory management. Its use of active RFID makes the tag able to provide tracking with a long-reach of 30 meters (98 feet).
This innovative RFID Tag is also designed to be tamper proof and sounds an alarm if someone tries to dislodge it. With a smart tiny button on the bottom of the tag when a user applies the tag to the asset, the button is pushed in and the tag will transmit a “normal” signal. If the tag is peeled off, the button will pop up and the tag will send an “alarm” signal to indicate abnormal status. The tag’s built-in LED will flash, or ‘beacon’, once the tag receives a specific signal from a nearby RFID reader, allowing the user to locate the asset attached with the beaconing tag.
provides the following features:

Excellent for mount on-metal applications Reliable RF signal and communication over a long distance even in harsh environments Tamper-proof with alarm 2.45GHz microwave frequency 100-tag/s identification rate, 2,000 tag management in RF field Transmits ID every 2 seconds Reader communication is bi-directional, providing two commands: Addressing Command and Stop Addressing Command.

recommends its smart 433MHz active key fob RFID tag especially designed for applications where door or safe keys need to be tracked.

About GAO RFID Inc.

GAO RFID Inc. is a leading provider of Radio Frequency Identification (RFID) hardware and solutions to end users worldwide. GAO RFID combines best of breed with low cost RFID readers, RFID tags and enabling-RFID software. We have a wide variety of RFID readers, tags and antennas in all the RFID technologies, Low Frequency (LF), High Frequency (HF), Ultra High Frequency (UHF, Gen 2) as well as Active and Semi-Passive. GAO RFID’s products and services are easily customized for use in Asset Tracking, Health care, Supply Chain & Logistics, Event Management, Access Control, Livestock Tracking, Inventory Control & Management, Field Service, Maintenance and Document Authentication.

For any media queries:

Director of Marketing,
416-292-0038 ext 238

RFIDs and the Parts They Play in Enterprises

For a business to become truly competitive and highly efficient, it should learn to adapt with a variety of changes. One of these will be the use of technology to ensure the security of their data and to administer proper flow of operations. You can get all these and more with an RFID, or radio-frequency identification card.

Defining an RFID Tag

A tag that is considered to be an RFID will be something that you can attach to an animal, product, or even human being. The card, which can react through radio waves, contain all information for identification of the object or person it’s attached to. As to how fast it can be detected will depend on the power of the machine. Some are extremely sensitive that even if you’re meters away you can already be detected. Others will only function if you’re near the RF scanner.

There are also two components that make up the RF card. One of these is the integrated circuit, which has three functions: (1) modulates the radio signals from the RFID to the scanner and vice versa, (2) store and process information, and (3) other functions that could have been customized by the enterprise. You can also find an RFID that doesn’t have any chip attached to it, yet it still possesses some special parts that allow it to function like any circuit-based RFIDs. This one is a lot cheaper, and you can place it directly into any product.
(more…)